Third-generation high-range water reducing admixture. Solid content ≥98%. Ideal for C30+ high-strength concrete, precast, and dry mix mortar. Factory direct from Jinan, China.
| Appearance | White to light yellow flakes |
| Solid Content | ≥ 98% |
| pH (20% solution) | 7 ~ 9 |
| Water Reduction | Up to 25%+ |
| Dosage | 0.1% ~ 0.3% of cement |
| Chloride Content | ≤ 0.1% |
| Standards | ASTM C1116 / EN 14889-2 |
When your concrete mix faces these problems, PCE superplasticizer delivers the performance edge.
Traditional mixes require too much water to achieve workability, weakening final strength and durability.
Slow strength gain delays formwork removal in precast plants, reducing daily output and profitability.
Poor cohesion causes aggregate separation and water bleeding, leading to uneven surface quality and honeycombing.
Liquid PCE contains 50-80% water. You pay to ship water across oceans. Flakes eliminate dead weight entirely.
Liquid PCE freezes in cold climates, destroying performance. Solid flakes have no freezing risk — store anywhere.
Without PCE, more cement is needed to reach target strength. PCE reduces cement 10-20%, cutting cost and CO2.
Solid flakes deliver the same performance with dramatically lower shipping, storage, and handling costs.
Significantly lower W/C ratio for higher compressive strength and improved durability. Designed for C30 to C100 concrete.
No water weight. Same active ingredient ships at 1/3 the volume of liquid PCE. Ideal for long-distance export orders.
Extended workability window for hot climate concreting. Proven in 45°C+ GCC environments without rapid setting.
Chloride content ≤0.1%. Safe for reinforced and prestressed concrete. Zero risk of steel corrosion initiation.
Solid flakes deliver the same performance with dramatically lower shipping, storage, and handling costs.
PCE Flakes vs Liquid PCE in Hot Climates: dissolve completely in 3 minutes at 30°C water, same performance as liquid PCE, 40% lower freight cost
| Parameter | PCE Flakes (Michem) | Liquid PCE |
|---|---|---|
| Solid Content | ≥ 98% | 20% ~ 50% |
| Shipping Cost | Low (no water weight) | High (50-80% water) |
| Freeze Resistance | No freeze risk | Freezes below 0°C |
| Shelf Life | 18+ months (sealed) | 6-12 months (temperature sensitive) |
| Leakage Risk | Zero (bagged solid) | Drum/IBC leak risk |
| Storage Space | Compact (high density) | Large volume |
| MOQ | 1 Ton (flexible) | Varies |
| Best For | Export, dry mix mortar, precast | Ready-mix batching plant |
Michem PCE flakes are engineered for the most demanding construction applications worldwide.
Optimize slump and workability for transit-mix trucks. Maintain 2+ hour slump retention in hot climates. Reduce water, boost strength.
Accelerate early strength gain for faster formwork turnover. Improve mold filling for complex shapes. Proven: 25% lower reject rate.
Enable C60 to C100 grade concrete for high-rise buildings, bridges, and nuclear structures. Ultra-low W/C ratio with PCE.
Tile adhesive, grout, plaster, and waterproofing mortar. PCE flakes blend easily into dry formulations for consistent batch quality.
Superb flow characteristics for floor leveling systems. Achieve high fluidity without segregation or bleeding.
Excellent cohesion for wet-mix shotcrete applications. Reduce rebound loss and improve adhesion on tunnel linings and slope stabilization.
Standard quality parameters. Full TDS, COA and SDS available upon request.
| Item | Standard Value |
|---|---|
| Appearance | White to light yellow flakes |
| Solid Content | ≥ 98% |
| pH Value (20% solution) | 7–9 |
| Moisture Content | ≤ 2% |
| Bulk Density | 450–650 kg/m³ |
| Water Reduction Rate | Up to 25% or above |
| Chloride Content | ≤ 0.1% |
| Recommended Dosage | 0.1%–0.3% of binder materials |
Direct manufacturer with full quality control. No middleman, no compromise.
We have separate production lines and R&D specifically for PCE, ensuring consistent quality for global applications.
Our PCE rating is equivalent to that of Sika, BASF, and Mapey. In some practical applications, it is even superior, making it a direct replacement.
Direct from manufacturer to your plant. Competitive pricing for bulk orders. Flexible MOQ (1 ton standard, smaller trial orders accepted).
Our technical team understands EN 998-1, EN 13499 and ETAG 004 requirements. We can recommend the optimal grade and dosage for your ETICS system.
200g–500g free samples shipped via FedEx/DHL within 7 days. Test with your formulation before committing to a bulk order.
We are equipped with a high-standard laboratory and strive to develop higher-quality products.
✅ Comprehensive TDS & Brochure – Get in-depth technical details about our PCE.
✅ Free Sample (200g or 400g per bag) – Test our high-quality PCE in your formulations.
✅ Fast & Reliable Delivery – Shipped via FedEx or DHL straight to your door.
✅ Expert Support – Assistance with formula adjustments and technical guidance.
Available in:
• 500kg/Pallet (4 bags/ layer) • 600kg/Pallet (4 bags/ layer) • Customized packaging
*Notes:Please make sure Michem PCE products are sealed and stored in a cool, dry place away from direct sunlight or fire sources.
"We needed C80 concrete for the Burj Khalifa District expansion. Michem PCE consistently met the 2-hour slump retention requirement at 45°C. 5 batch reorders so far."
"Switched from liquid PCE to Michem flakes. Our shipping cost dropped 35% and warehouse space freed up 40%. The performance is identical — same slump, same strength."
"Our precast plant runs 24/7. Early strength development with Michem PCE allowed us to cut demolding time by 3 hours. Daily output increased 20%."
PCE flakes contain ≥98% active solid content in a dry, free-flowing form. Liquid PCE typically contains only 20-50% solids diluted in water. Flakes eliminate the cost of shipping water, have no freeze risk, and offer a longer shelf life (18+ months vs 6-12 months). Performance after dissolution is equivalent.
Dissolve flakes in water at room temperature with agitation (mechanical stirrer recommended). Typical preparation: 20% solid solution. Dissolution time: 20-40 minutes depending on water temperature. For dry mix mortar, flakes can be blended directly with other powder ingredients.
Standard dosage is 0.1% to 0.3% of cementitious material by weight. For high-strength concrete (C60+), 0.2-0.3% is typical. For ready-mix concrete with normal workability, 0.1-0.15% is sufficient. Always conduct trial mixes to determine optimal dosage for your specific materials and conditions.
Yes. Michem PCE complies with ASTM C1116-03 (Standard Specification for Chemical Admixtures for Use in Producing Flowing Concrete) and EN 14889-2 (European standard for concrete admixtures). We provide full TDS, MSDS/SDS, and COA with every shipment.
Yes. We can adjust molecular weight, side-chain density, and other parameters to match your specific concrete formulation requirements. Provide your target specifications and our R&D team will prepare a customized grade. OEM/private labeling is also available.
200g or 400g samples shipped within 48 hours via FedEx/DHL. Test our quality before you commit. No obligations.
Your inquiries answered within 6 hours. Please include your plant type and monthly volume for a tailored quote.
We will provide professional solutions to you promptly!
India inquiries answered within 4 hours. Please include your plant type and monthly volume for a tailored quote.
